- 您现在的位置：买卖IC网 > Sheet目录1222 > IS-DEV KIT-8 (NKK Switches)SMARTSWITCH DEVELOPMENT KIT 8
IS-Dev Kit-8 User’s Manual
7850 East Gelding Drive ? Scottsdale, AZ 85260-3420
Command to turn the switch display off
This command turns off the OLED display.
command format:
26H
51H 69H
transmit format: (xxH) (xxH) (xxH)
Command to turn the switch display on
This command turns on the OLED display.
command format:
26H
51H 66H
transmit format: (xxH) (xxH) (xxH)
Command to turn the OLED voltage off
This command turns off the 16V supply to the OLED display.
command format:
26H
51H 74H
transmit format: (xxH) (xxH) (xxH)
Command to turn the OLED voltage on
This command turns on the 16V supply to the OLED display.
command format:
26H
51H 75H
transmit format: (xxH) (xxH) (xxH)
Note: This command should only be used when the OLED displays are in the off mode.
Commands that disable switch and timer execution
Upon transmitting any of the following commands, the timer stops running and attributes for the switches
activity do not execute. The switches are still scanned and reported. The attributes execution is enabled upon
reboot/power up or by command from host.
The reason for disabling attribute execution is for faster download of images and attribute as well as command
to check the image at any address.
Command to download setup data
The command downloads the flags and other setup values. This information are stored on the MicroSD flash.
command format:
transmit format:
2AH
(xxH)
[00H]
(xxAH)
[00H]
(xxAH)
[55H]
(xxAH)
[flag]
(xxAH)
[0001H]
(xxAH)
[0001H]
(xxAH)
[reserved]
(xxAH)
[flag] is one byte sent in ASCII HEX format. (Detail below)
[reserved] is two bytes sent in ASCII HEX format. These bytes should be 00H. This is for future use. Customer
could use the last byte for storing the data version.
All other byte must be transmitted with the stated values.
IS-Dev Kit 8 Users Manual D.doc
Toll Free 1.877.2BUYNKK (877.228.9655) ? Phone 480.991.0942 ? Fax 480.998.1435
www.nkkswitches.com ? Email engineering@nkkswitches.com
Page 19 of 35
1013
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
IS-P410905
POWER SUPPLY 120VAC FOR DEV KIT
IS-SERIAL-CABLE
SERIAL CBL RJ11-DB9 FOR DEV KIT
IS18WWC1W-K
DESIGN KIT FOR OLED ROCKER
ISL1208EVAL
EVALUATION BOARD FOR ISL1208
ISL21007-EVALZ
EVAL BOARD FOR ISL21007
ISL21032-EVALZ
EVAL BOARD FOR ISL21032
ISL21060-EVALZ
EVAL BOARD FOR ISL21060
ISL21080-EVALZ
EVAL BOARD FOR ISL21080
相关代理商/技术参数
IS-DEV KIT-9
功能描述:SmartSwitch?OLED Switch SmartSwitch? Series Switches with Programmable Display Evaluation Board 制造商:nkk switches 系列:SmartSwitch?? 零件状态:有效 主要用途:带可编程显示器的开关 嵌入式:- 使用的 IC/零件:SmartSwitch?OLED 开关 主要属性:2 OLED 开关，带闪存的 PC 板 辅助属性:电源和编程连接 所含物品:板，线缆，电源 标准包装:1
IS-DEVKIT-4
制造商:NKK Switches 功能描述:Development Kit w/ Two RGB Smartswitch LCD Programmable Pushbutton Switches
IS-DEVKIT-5
制造商:NKK Switches 功能描述:Two 36 x 24 RGB Switches on PC Board w/ Fash Memory Power and Programming
ISDF-02-D-M
制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-02-D-R
制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-02-S
制造商:Samtec Inc 功能描述:.050[1.27] DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-02-S-M
制造商:Samtec Inc 功能描述:.050?1.27? DISCRETE WIRE INSULATOR AND LATCH ASM - Bulk
ISDF-03-D
制造商:Samtec Inc 功能描述:CONN HOUSING PL 6 POS 1.27MM ST - Bulk